Burner Control Series RA890G
Product Specifications
Application > Either a line or low voltage controller can be used
Dimensions (in.) > 5 in. high x 5 in. wide x 4 3/4 in. ...
Burner Control Series TFI812
Burner Control Series TFI812
TECHNICAL DATA:
- Supply voltage 220 / 240 V (-15... +10%)50 Hz (40 - 60 Hz)
- Fuse rating 10 A rapid or 6 A slow
- Power consumption 5 VA
- Max. current peroutput terminal 4 A
- Max. current total 6 A
- Pre-ignition time 15 or 10 sec.
- Delay, post-ignition time none
- Safety interval nominal 5 or 10 sec.
- Safety interval max. 10 or 20 sec.2nd stage delay approx. 20 sec.
- Reset delay after lockout approx. 60 sec.
- Permissible ambient temperature -20° C to +60° C
- Sensitivity 1.5 µA
- Min. ionisation current required 2 - 3 µA
- Ionisation probe insulation probe - earthgreater than 50 MΩ
- Stray capacitance probe - earthless than 1000 pF(max. 20 m cable)
- Insulation standard IP 44
- Weight incl. baseplate 250 g
- Mounting attitude any
สอบถามข้อมูลสินค้า โทร. 02-741-6200 E-mail: innothaiweb@innothai.com
-
-
Burner Control Series RA890F Product Specifications Application > Primary control for rectification application (Flame Rod for example) Dimensions (in.) > 5 in. high x 5 in....
-
Burner Control Series RM7800 120V. Safety Features: Interlock check. Dynamic Ampli-Check™. Closed loop logic test. Dynamic input check. Dynamic safety relay test. Dynamic self-che...
-
Burner Control Series EC7800220V.Safety Features:Interlock check.Dynamic Ampli-Check™.Closed loop logic test.Dynamic input check.Dynamic safety relay test.Dynamic self-check logic....
-
Burner Control Series DLG976-N TECHNICAL DATA: Operating voltage 220 / 240 V (-15... +10%)50 / 60 Hz ( ±5%)or 110 / 120 V (-15... +10%)60 Hz ( ±5%) Fuse rating 10 A fast, 6 A slo...
-
Burner Control Series MMI962.1 TECHNICAL DATA: Operating voltage 220 / 240 V (-15... +10%)50 Hz Differing frequency Results in a proportionaldeviation of the time Rating fuse max....
-
Burner Control Series TBC2800A1000 Product Specifications Power Input:220VAC 50/60Hz 9VA Multi Input sensor:Flame Rod,UV Sensor(C7027A/C7035A/C7044A) Lifecycle:24 hours continuou...
-
/Burner Control Series DBC2000 Product Specifications Employs a plug-in mounting method Uses a microprocessor to improve performance Status and fault indication by indicator LEDs ...
-
Burner Control Series DBC1500- Employs a plug-in mounting method - Uses a microprocessor to improve performance - Status and fault indication by indicator LEDs - Safe start check ...